| The Deck Clip |
 |
|
Anyone can install The Deck Clip™. No special tools are needed if using grooved decking, only a good drill driver with an adjustable clutch.
If your decking is un-grooved you will need a biscuit jointer to make a slot in the edge of the boards above every joist to accept The Deck Clip™. One clip is installed on every joist.
We installed a 12 x 20 grooved deck with inexperienced help in 5 1/2 hours. Two persons installed decking and one person cut boards to length. No plastic clips. No screws stripped out, no messy adhesives were needed and the only drilling was on the starter and finisher boards ! The end result? One beautiful deck.
If you are a contractor you can expect The Deck Clip™ to install about as fast as drilling and face screwing every board! CLICK FOR INSTALLATION INSTRUCTIONS
The Deck Clip™ comes in standard packs of 175 clips and screws per box along with 10 extra screws for starter and finishing boards, drivers and instructions for installation. One box of deck clips will fasten 100 square feet of 6" decking on 16" centers or 150 square feet on 24" centers.
Single Packs - $89.95 Each 8 unit Pro Pack - $649.50 per unit Pro pack includes FREE ground shipping in continental US. |
