WHAT MAKES The Deck Clip™ SPECIAL?

We produce only metal hidden deck fasteners. Extruded out of 6063-T5 aluminum, The Deck Clip™ has a unique shape that allows it to grab both sides of the decking and actually holds it down like a miniature spring, keeping your deck boards tight forever.

The unique design works with all types of hardwood decking, cedar, redwood, and most composites, whether pre-grooved or in biscuit jointer slots. The Deck Clip™ is the only one that works in our exclusive angled grooved decking.

With our coated stainless or carbon steel screws to eliminate stripped heads you get a combination that can’t be beat and costs less that plastic clips.

WHY CHOOSE The Deck Clip™?

Installing a hardwood deck can present some challenges. Having to deal with stripped out screw heads, broken bits, and screws pulling through plastic clips can make even a small project frustrating. The Deck Clip™ solves all these problems and gives you more strength and ease of installation than any other fastener on the market.  Rounded edges ease installation and the lobes on the bottom grip the board and allow movement both ways. You will be amazed at how tight these clips hold and how easy they install.

DON'T SCREW UP THE TOP OF YOUR DECK!

Go ahead - your're in a hurry - you want to get it done - so you just screw down that lovely hardwood deck from the top. Looks OK. Until the cracks show around the screw heads and the heads loosen up and the water soaking in around the screws discolors the wood. Do it right the first time with The Deck Clip™.  Installs fast - holds the most stubborn woods  - and looks great when finished!

DON'T TRY TO HOLD DOWN THAT "IRON WOOD" WITH A PIECE OF PLASTIC!

You wouldn't use plastic fasteners to hold down your deck frame, or your house studs! Why use a plastic fastener to hold down a piece of decking, especially hardwoods. We have seen hardwood decking boards that are under stress shear off plastic clips! Not with The Deck Clip™! The wood will fail first! Isn't that the way it should be?

THE DECK CLIP™ AND CORROSION

The The Deck Clip™ is manufactured out of the same grade of Aluminum used on marine applications worldwide and is coated with 2 coats of Magni-599 corrosion resisitant coating. This combination passed a 1000 hr salt spray test , ASTM method B-117. You can be assured The Deck Clip™ will perform with any wood or composite. Aluminum bolted down with stainless steel is used often on offshore drilling rigs and they last for decades.

Dealer Inquiries Welcome

Still not convinced?

Before you buy any other brand of hidden fastener call me, Jim Guffey, and I will tell you why The Deck Clip is the only Guaranteed hidden deck fastening system out there!

Ask any other brand about their guarantee!

1-800-545-8884